Different packaging has different requirements. With our AtmoCheck® LEAK TEST we can support you to test and ensure the integrity of your packaging. For many different packaging types and requirements, completely without operatortraining.

Leak tester for CO2 cylinders Highly precise, reliable and fast As an alternative to purchasing bottles of sparkling water in PET & glass bottles, more and more households and companies are using carbonation devices to create on demand sparkling mineral water. There is a significant economic and environmental benefit. These devices utilise CO2 cylinders that require refilling before being resupplied back into the market. After repeated refilling, leaks can occur at the output valves, which at the point of refilling, cannot be detected by traditional methods e.g. leakage spray. To prevent dangerous leaking cylinders reaching the trade and private markets (or even an empty cylinder leading to customer complaints), all cylinders should be checked for even the smallest leaks, directly after filling. AtmoCheck® LT is an effective quality control instrument for simultaneously leak testing up to 8 or more (optional) CO2 cylinders. Even the smallest leaks can be detected using our reliable CO2 infrared sensor technology. This unit provides you with a highly reliable leak test procedure in order to increase your quality assurance and safe handling of gases! By means of compressed air and a venturi nozzle a slight vacuum is created at the extraction valve. Highly sensitive CO2 infrared sensors draw in the sample gas and detect even the smallest CO2 concentrations in the ppm range. The measuring times (<10 sec.) and threshold target values can be freely assigned, so you can individually identify the leaking cylinder(s) and immediately remove it/them from production. AtmoCheck® LT allows configuration of user and product settings, passwords and data logging configuration etc.

Gas analyser with integrated Leak Detector and Burst Tester combined in in one single instrument The AtmoCheck® TPC-II sets new standards in quality assurance. AtmoCheck® TPC-II is a compact analytical instrument specifically designed for the effective random sample inspection of, for example, food packaging.This adaptable analyser is ideal for quality control in packing areas, and thus improves the economic efficiency of production. The AtmoCheck® TPC-II is available either as a pure analytical instrument, or optionally an integral leakage test and burst test facility can be incorporated.The minimal sample gas requirement and the protective atmosphere independent leak test makes the AtmoCheck® TPC-II the perfect quality assurance system that is easy to integrate into production or in the QA laboratory. The automatic test sequence allows you to perform up to 3 tests in one step. - Automatic analysis of residual oxygen and carbon dioxide content- Packaging leakage test for leaks < 0.5 μm- Burst test up to 1,500 mbar The leak test meets the current standard DIN 55508-1: 02/2018 for leak testing of flexible packaging. Application Areas - Analysis of residual oxygen and carbon dioxide content e.g. in MAP packaging- Leak test of flexible film packaging, vacuum packaging- Burst testing up to 1,500 mbar- Suitable for the food and pharmaceutical industry- Applicable for virtually all types of packaging   AtmoCheck® TPC-II is our top of the range instrument for quality control of for example, food packaging. The analyser can be used for random measurements in both food production areas and in the quality assurance laboratory. Operation via the 10" touch screen display is intuitive, and shows all relevant information on the selected product, measuring progress and limit values. Analyse the residual oxygen and carbon dioxide concentration of MAP packaging precisely and reliably. Obtain reliable measurement results in the shortest possible time concerning any possible leaks in the packaging with a value < 0.5μm. Optionally check the burst strength as a final quality test. Detect faulty product packaging via a logical alarm using a "Traffic Light" system. The measurement data memory can be easily integrated into existing network systems. Only if required, the interface can be accessed remotely for easy maintenance. Test the packaging directly in the packaging area, thus shortening downtimes and eliminating complaints and product returns.Depending on the selected accuracy and detection limit of leakage sizes, all TPC-II analysers are adjusted with calibrated test leaks. We would be pleased to run a series of tests with you on site.

Gas analyser with integrated Leak Detector and Burst Tester combined in in one single instrument The AtmoCheck® TPC-II DESKTOP sets new standards in quality assurance. AtmoCheck® TPC-II DESKTOP is a compact analytical instrument specifically designed for the effective random sample inspection of, for example, food packaging.This adaptable analyser is ideal for quality control in packing areas, and thus improves the economic efficiency of production. The AtmoCheck® TPC-II DESKTOP is available either as a pure analytical instrument, or optionally an integral leakage test and burst test facility can be incorporated.The minimal sample gas requirement and the protective atmosphere independent leak test makes the AtmoCheck® TPC-II DESKTOP the perfect quality assurance system that is easy to integrate into production or in the QA laboratory. The automatic test sequence allows you to perform up to 3 tests in one step. - Automatic analysis of residual oxygen and carbon dioxide content- Packaging leakage test for leaks < 0.5 μm- Burst test up to 1,500 mbar The leak test meets the current standard DIN 55508-1: 02/2018 for leak testing of flexible packaging. Application Areas - Analysis of residual oxygen and carbon dioxide content e.g. in MAP packaging- Leak test of flexible film packaging, vacuum packaging- Burst testing up to 1,500 mbar- Suitable for the food and pharmaceutical industry- Applicable for virtually all types of packaging   AtmoCheck® TPC-II DESKTOP is our top of the range instrument for quality control of for example, food packaging. The analyser can be used for random measurements in both food production areas and in the quality assurance laboratory. Operation via the 10" touch screen display is intuitive, and shows all relevant information on the selected product, measuring progress and limit values. Analyse the residual oxygen and carbon dioxide concentration of MAP packaging precisely and reliably. Obtain reliable measurement results in the shortest possible time concerning any possible leaks in the packaging with a value < 0.5μm. Optionally check the burst strength as a final quality test. Detect faulty product packaging via a logical alarm using a "Traffic Light" system. The measurement data memory can be easily integrated into existing network systems. Only if required, the interface can be accessed remotely for easy maintenance. Test the packaging directly in the packaging area, thus shortening downtimes and eliminating complaints and product returns.Depending on the selected accuracy and detection limit of leakage sizes, all TPC-II analysers are adjusted with calibrated test leaks. We would be pleased to run a series of tests with you on site.